Dash restoration part 2!

Today I managed to copy the vinyl texture with the INP Mouldmaker stuff.

IMG_4789.JPG
Basically this is latex which you pour over the vinyl, use a heatgun to let it cure and you’re good to go!

IMG_4790.JPG

In order to actually get the structure on the repair compound, you put the mould on the last thin layer of it, put a piece of paper on it and let it cure using a sealing iron instead of the heatgun.

I’m pretty impressed of how easy this actually is and I must say that the result is pretty good so far considering this is the first time!

IMG_4788.JPG

IMG_4786.JPG

The vinyl structure isn’t super clear in the pictures above but it’s there 🙂
I’m confident that once the dash is repainted (which is what I’ll do when the cracks are taken care of), it’ll look really good!

1 thought on “Dash restoration part 2!”

Leave a Reply

Your email address will not be published. Required fields are marked *